Put new rotors on and they are rubbing on the metal clips, i measured the old rotors to the new ones, and sure enough there 1/ 16th of an inch bigger :(.
im i screwed ? has any one else had this problem, right now im going to sand down or cut the metal brackets and see if thats works.
anyother help is welcome
you could probably get the rotors machined down around the edges instead of sanding/grinding the brakets so you don’t weaking them. you would have to call a shop and find out if that is doable i have never done this or know anyone that has, but i couldn’t see why not. just a suggestion.
curious… where did you get the rotors? brand?
as far as I can tell you’ve got S14 rotors which are approx 1/16’’ bigger or something…
s13 = 254mm where as the s14 is 257mm i believe and I think something like 1.5mm-2.5mm = 1/16’’ ?
Im sure someone else will be able to correct me or clarify
get s14 brackets?
thats what im doing if the seller cant help me
off of ebay lol (maybe thats why) the company is ucautoparts from london ontario
then they would be 5 bolt.wouldnt they?
95 S14 is 4 bolt, or certian models of the s14 atleast come 4 bolt.
o ok didnt know that , ill mention that to the guy when i email. if hes a jerk about it, ill prob get someone to machine them down a lil
SE = 4 bolt 15" rims
LE = 5 bolt 16" rims
it could be S13 ABS and non ABS rotors
happened to me b4…
non abs rotors are a bit smaller and u wont notice till u put the bracket on
lol