Some interior shots after the steering wheel install.
The steering wheel is off ebay. I decided not to buy a spoon steering wheel from jhpusa,after all its only a steering wheel. I had the MOMO Hub sitting around, so i bought a cheap wheel off ebay, was getting sick of the original steering wheel, to much play and thin and large diameter dynamics.
I was expecting something cheap quality wise from ebay, but surprisingly this leather steering wheel is nice plus has a horn.
The install was quite simple except had to get one mod done. The end of the hub was cutting off everytime the wheel was turned, and was very stiff, for $20, i got a custom, spacer made and the thing was sweet after wards. The play has gone, though there is some left. However, not enough to fix yet. The other problem was the ground horn wire, took the original two horn wires, plugs right off, cut one wire off the original, and used it as the ground wire with the momo, as the momo already has its own horn wire. The hard part was trying to figire out how to, and where to put the ground wire, as the steering wheel screws were 2mm too wide for the ground wire face, so i tried different spots in the hub over few days, but every time i came back from work, and the car had been sitting in the heat over a period of time, the horn would not work.
Finally figured out a solution, took out all six screws for the steering wheel centre, placed the ground wire face on one of the hub 6 holes, placed electric tape on it, screwed in 5 of the screws, and just pushed the 6th one in slowly and with a little bit of strenght the screw widened the ground wire face and snugly fitted through, and the horn works perfect now. It was tedious, but worked.:R
And yes its a very clean job. I always do the cleanest and most reliable jobs,i have a sickness, very hygeinic and a perfectionist, if i can’t do it my self i get it professionally installed, i was really tired, so i got the tach installed for only $40!!!, including extra wires,soldering and splices all free.
This guy i know will hook anyone up with anything, you name it they do it or know someone who does it, labour costs are very resonable!!!.
They work on minivans to C6 corvettes. So if you need something done, let me know.They have good experiance, and have worked on many different kinds of cars.
