Crappy Tire has the Lincoln on sale this week, so I’ll probably pick it up =0.
2-?
POR-15 is a brush-on coating for preventing rust. Sort of like roll-on bedliner, but thinner I think. I think the only way to get it is to order it online though :/:
3- 16-18 gauge is prefered for floor anything thicker will not form easly for curves ect.
use 14 or thicker for the frame as you want as much strength as your welder will weldps the lower the gauge metal the thicker it is
also make shure whatever welder you get has enough amperage to weld the material you are using
for forming metal a crappy hammer and dolly set from princess auto will work to start out. get the peice close tack it in and beat the crap out of it as you weld it down hot metal forms easlyhope that helps
Bah, in my head I knew that the lower the number the thicker, but somehow still typed it out backwards :(. Thanks for the advice, it was pretty helpful. Any particular hammer type you’d suggest getting, or do they have one specifically for bending the crap out of metal? Yeah, I’m a bit of a noobie <_<.