1991 ka24 into a 1993

hello everybody
iam swaping out the ka24 froma 91 240 into a 1993
i have the motor and tranny in and ever ything seems to be plug and play
but i am getting no spark and no fuel into the engine
the pump is working …

any ideas ??
thanks in advance

crossed fuel lines?

nope thats not it = (

do you get pulse to the injector plug? pop off a plug to an injector and put a test light on it and see it pulses or not. If the pump is working, either something in the rail is clogged, injectors are clogged or your not getting pulse.

As for no spark…pop off the cap and have a look everything is ok, how were you testing for spark?

ECU.

Use the ECU that came with the engine.

hey
i found that the brown plug that the ecu plugs into the chassis has some extra wires
does have body have wiring diagram for this ??
thanks in advance

hey i just found out the chassis 1993 used to have a sr20det in it ?
that means i have to rewire the chassis harness?
AGGHHHHH
??? any ideas ??

what are you talking about ?

no 93 came in north america with an SR. Unless the car had previously been swapped over to SR then back I don’t think there should be an issue.

you’ve obviously missed something in the installation, did you port the harness and ecu over with the engine, or did you just drop the motor in and expect everything to hook up and work right away?

WHOO
yay i got it figured out
ya the car had swaped a sr20det before …
the 2 plugs near the battery just had to be rewired …
thanks for all the input …