Am I missing anything for turbo set up?
Turbo
Turbo mani
Downpipe
BOV
Intercooler
IC piping
Injectors
chipped ecu w/ crome
Do I need a turbo timer?
Am I missing anything for turbo set up?
Turbo
Turbo mani
Downpipe
BOV
Intercooler
IC piping
Injectors
chipped ecu w/ crome
Do I need a turbo timer?
boost controller
fuel pump
oil feed/return lines
Do I need a boost controller if i’m only gonna run like 7 psi cuz its gonna be daily driver till winter…what kinda fuel pump?
holly 255 or walboro 255
the wastegate spring is already set to 7psi,
`hahha thats about aquater of what you need
what to you learn about the nickel and dime peices that screw you over
go back and research lil more
You will also need T-Bolt clamps and silicone to hold your piping together. A pump I like the walboro 255 HP myself, its a high pressure pump you just can push them more in the future plus they take a beating better it seems. Turbo timer isnt needed but if you can get one they are nice, you could just let the car run a few seconds then shut it off without one. Also going to need a good bit of vacume line and T’s. You will need to tap your oil pan or get another pan tapped also need all your oil return and feed lines and fittings (HybridDynamics should have them all). What injectors you have ???
Boost guage…
How don’t those Fuel Pumps overun the stock FPR? I don’t understand how you (honda) guys get away with that (among many other things)
going 10’s on 14b on the stock fpr
No brainer. 14b For President :burnout:
I got DSM 450s
is your clutch going to hold the extra power?
when i started planing my turbo build i picked up a book called maximum boost to further my knowledge of turbos. its a great read and well worth the money!
Jimmy
I have an exedy puck in my car now so i am told from the person I bought it from but I have never had it apart to look at it but it is def a puck
Where can i get that book from?
no time or money for book! we got couplers to buy!
Got any examples of nickel and dime pieces?
barns and nobles
how much did ya pay for it? Where at in Imperial do you live I work at the 171st rite there at the exit
i live on california hollow right by the high school. my friend jeff works at the 171st one weekend a month. i think this is his on week too.
the book cost me 34.95 but was worth every penny. im happy to say that i can finally read a compressor map :):)
You know what your buddies job is? Im in intel
im not exactly sure but i know that he deals with planes. haha