for the skyline fanz

SON240sx Automotive
1

Post subject: NISSAN GT-R 3.0L Version

RB30 OS-E2996
The OS Giken RB30 is designed to replace the block and bottom end components of an RB26DETT. The components used are rated for up to 1400hp, so it is ideally suited to extreme drag racing applications. It increases stroke to 86mm for a square 86mm/86mm bore/stroke ratio and a capacity of 2996cc.

OS Giken RB30kit contents
Supplied as pre-assembled short engine.

o 1 cylinder Block (Spacer, liner, piston cooler and oil orifice are factory fitted.)
o 1 billet chrome-molybdenum Crankshaft.
o 6 billet-forged, chrome-molybdenum H-beam connecting rods.
o 7 crankshaft (main) bearings.
o 6 connecting rod (big-end) bearings.
o 6 forged aluminium pistons (includes rings, pins, and snap rings.)
o 1.3mm metal gasket (we also offer 1.2mm, 1.4mm, and 1.5mm gaskets)
o 1 timing belt (we offer special Cam slide pulley ($200ea. as an option)
o 1 belt tensioner kit.
o 14 specially produced, reinforced head stud bolts.
o 14 specially produced, reinforced crank cap stud bolts and nuts.
o 3 M6 bolts.

  • Crankshaft, pistons and connecting rods are factory fitted to the cylinder block.
  • You will need an OS R3C or R4C clutch, exclusively made for this kit. as the crankshaft has 8-hole fitting for the flywheel.
    also check this site out
    all you will ever need to know about the beloved nissan skyline.
    http://en.wikipedia.org/wiki/Nissan_skyline
2

NOOOOOOOOOOOOBBBBBB shut your face!

3

and “fans” is not spelt with a z.

4

The aussies do this “all the time”. Holden has a car with an RB30ET in it, you just take the DOHC head from a regular nissan RB, attach and enjoy.
(alright it’s over simplified but that is what they do)

5

yup, yup, 94 r32 rb25de head on a rb30e block…series 2 block, series one isnt as strong…problem with that vs the OS kit is that the ACTUAL rb30 cannot support loads of hp, much like the stock rb26…90% of the rb26’s pushing 1000hp or more have the beefier N1 block…this is why the OS kit is a good idea if you’re wanting to make loads of hp.

on the other hand…i’d rather just spend the 30000$usd on new car.

6

Where have you been for the past few months? This is nothing new.

7

:roll: