My special 96 S-10/Sonoma/Bravada mini

This truck is titled as a '96 S-10 but there isn’t a whole lot of it left from '96. The first pic is the most recent with a GMC Sonoma hood (Thanks, PewterSS), 4x4 Sonoma bumper cover and Olds Bravada grill. It’s shaved pretty smooth without the antenna, door handles, or tail lights. The rims are 17" KMC Tramps with 215/45/17 Michelin Pilots. With the high offset rims (they are origionally for my 4x4 S-10 Blazer) I had to use 1.5 inch adapters to correct the offset. The pneumatic suspension is Firestone 2600 air bags on each corner fed with (8) 10mm SMC valves and 1/2 airline out of a 12 gallon tank. The air is supplied with a ViAir 450c and soon to be added is my York EDC. The front setup is Belltech 2" drop spindles with suicidedoors.com bag brackets. The rear is also suicidedoors parts - S-10 specific 3 link with super pivot joints with an 8" step notch and flame brackets. The rear bridge was just some metal scraps available to me. I don’t even know how to explain the setup I built for my additional tail lights and license plate. Here is the thread pertaining to that, but most of the pics have been removed… the vids towards the end of the thread are still up. http://www.pittspeed.com/forums/showthread.php?t=4757

But seems people like pics better than words…

http://www.pittspeed.com/uploaded/s10blazed01.jpg
This pic is from the other day. The sonoma bumper is just on for a mock up. I still need the support for behind it. The tire also needs air.

http://www.pittspeed.com/uploaded/s10blazed02.jpg
Another angle with my old bumper on it.

http://www.pittspeed.com/uploaded/s10blazed03.jpg
Here is an older pic showing my LEDs. This was before I added the rear tail light setup.

http://www.pittspeed.com/uploaded/s10blazed04.jpg
Rats nest of wires and air hose! Here is the rear setup before I got a chance to run the wires properly.

http://www.pittspeed.com/uploaded/s10blazed05.jpg
haha, I still crack up when I read that.

http://www.pittspeed.com/uploaded/s10blazed06.jpg
Better pic of the rear setup without the bed.

http://www.pittspeed.com/uploaded/s10blazed07.jpg
Another angle of above.

http://www.pittspeed.com/uploaded/s10blazed08.jpg
Comparative pic to show height…

http://www.pittspeed.com/uploaded/s10blazed09.jpg
Doubles as a recycler…

http://www.pittspeed.com/uploaded/s10blazed10.jpg
Depicting 2 extremes with my buddy Terry’s monster truck… complete with 4 wheel steering!

http://www.pittspeed.com/uploaded/s10blazed11.jpg
Still shot from a video I made a few springs ago. I like sparks.

http://www.pittspeed.com/uploaded/s10blazed12.jpg
Keeping PennDOT busy…

http://www.pittspeed.com/uploaded/s10blazed13.jpg
Progress pic…

wow…ur truck looks great!!! i love ur set up for the air bags!!! and that truck is sick thats lifted!!!

awesome. u gotta appreciate all that custom work, man. lookin good. ya, that big lifted truck is awesome too.

More pics of Orange truck?? :x:

x2

same body style as mine except that one is 4wd and actually looks good.

anytruck looks better than urs :smiley:

but urs is cheap and still runs soo thats sweet!!

x2

That last pic, that garage is insane… That fucker is so nice, with so much room, every tool imaginable… Too bad its in Columbus :doh:

Looks damn good john… Maybe I’ll post up a picture of another vehicle with a bravada front end :x:

Make a post for your truck to help populate the truck section. I have some pics of the motor swap around here somewhere I will post for you.

I haven’t been to Terry’s place for awhile, maybe I’ll stop over there sometime next week and get some updated pics of his rig. He was planning on 4 more inches of body lift since I last saw it (that pic) and also a tilt front clip and hydraulic bed.

damn. thats crazy. so i assume he doesnt off-road that thing then

Surprisingly, before he did this chassis swap, he did! It was always muddy. At the time is was stock frame jacked up as high as he knew how to get it. I think 36 or 38s on it. Now its a fully custom built 4 wheel steering with 44s and he’s hoping to go bigger on the tires (the 44s came with the chassis when he bought it) He also had the old chassis for sale the last time I was over there. It was in 4 wheelin magazine 2 or 3 years ago with the old chassis. They asked him to do a photoshoot and he got a really nice article written up for him and the truck although he didn’t make the cover. They got some nice action shots of him jumping some sand dunes.

damn. thats sweet. u guys definatley r in different directions. monster trucks and low-riders. :slight_smile:

We have a deal for this years local car cruise in our town… I’m going to park under him :bigok: :shaggy:

badass truck! i wanted to see the before and after picture of the can getting crushed hehe. better yet make a vid of it!

at the time I didn’t have any means to get a video onto the PC. This spring I will make a better video… maybe do a 6 pack at once after I shake them up?? who knows

in the last pic who is that good looking guy with glasses :smiley:

The good looking part is open to debate, but thanks for helpin!

You should make a post about your truck(s) if you haven’t already to help get this section rollin.

oh hell yeah. sick ride, so jealous. can’t wait for more pics

Well I did get a newer pic the other day… I took it for Bravada 442 since he loaned me his set of rims. I just wanted to show him how cool they look tuckin the balloon tires…

needs a cowl hood!!!