RB25DET swap kit into 240sx

Classifieds
1

RB25DET series 1 engine
Compression test gave 170psi on all cylinders, engine pulls strong, burns no oil, no leaks whatsoever.

  • The engine has been completly cleaned (took it apart and cleaned everything inside and out).

  • All of the gaskets were changed with OEMs (with the RB25DET OEM Nissan gasket kit, including the head gasket).

  • ARP head studs.

  • New Greddy timing belt.

  • All sensors work fine.

  • Stock turbo with no shaft play.

  • Exhaust manifold ARP studs.

  • Transmission shifts perfectly, used Redline Lighweight shockproof fluid.

  • TopHat engine mounts (including transmission mount).

  • DriveshaftShop.com one-piece steel driveshaft (11lbs) with a new yoke.

  • Competition clutch ceramic 6 pucks (streetable).

  • Complete harness already plugged with a Greddy e-Manage Ultimate.

  • Greddy e-Manage Ultimate

  • Manual boost controller

Asking $3,500, everything included. You can contact me by private message or email: fnpux1@gmail.com.

2 videos of the engine running:

http://i5.photobucket.com/albums/y164/npux/th_RBForSale.jpg

http://i5.photobucket.com/albums/y164/npux/th_FirstRideDivx-1.jpg

And some pictures of what’s included and what was done on the engine:

http://i5.photobucket.com/albums/y164/npux/IMG_0376.jpg
IMG_0376.jpg800×600

http://i5.photobucket.com/albums/y164/npux/IMG_0391.jpg
IMG_0391.jpg800×600

http://i5.photobucket.com/albums/y164/npux/IMG_0420.jpg

http://i5.photobucket.com/albums/y164/npux/IMG_0176.jpg

http://i5.photobucket.com/albums/y164/npux/piston.jpg

2

im assuming this swap is for a S14??

but can be fitted into a S13 with driveshaft and harness changes…

3

Yes, forgot to mention it was swapped into a S14. It can easily be fitted into an S13, most of the harness work was done on the lower harness which is universal on all years 240sx. As for the driveshaft, we’d have to check if a NON ABS S13 has the same length as a S14 NON ABS.

4

I totally forgot to include this information:

Asking Price: 3 500$ OBO
Condition: Used
Location: Mercier, Quebec (J6R-1A7)
Will Ship?: N
Contact Info: Send PM for contact details

As for the price, please be realistic. I’ve had offers at 2k$… The RB25DET alone costs more then that at an importer, without all the modifications I’ve done to it (not to mention you have seen it working in the video) + all the other stuff in the kit.

Thanks

5

3 150$ takes it and you take care of transportation.

6

I can sell the RB25DET + Greddy emanage ultimate separately for 2 400$. The harness of the Greddy is already connected into the harness of the RB25 which is why it comes with the engine. Thanks

7

Now 2900$, taking too much space, it has to go!

8

Nope S14 is about 2-3" longer. I had to make a custom driveshaft for my kouki rb25 swap that I took from a S13…

9

2 500$ for the whole kit if someone buys it before the end of March!

10

Please check you PM’s and e-mail.

You will have several messages from me. :slight_smile:

11

if i only had the money id take this from you…if its not gone in 2 months id grab it off u

12

pmd very interrested

13

Please get back to me… I have been trying to set up a pick up date with you.