Love the comments from everyone! Really keeps me motivated
Any links of Yuri’s car? I cant put a car to the name…i googled too with no luck
Next pictures will be the dash and second panel! Stay tuned
Love the comments from everyone! Really keeps me motivated
Any links of Yuri’s car? I cant put a car to the name…i googled too with no luck
Next pictures will be the dash and second panel! Stay tuned
Nice… so sick.
Just wondering where the cluster came from? I see that its a custom tach in the center but wheres the other gauges from?
I’m just bad… been around hatches all my life. I’ve never actually seen a coupe in person!
Looks sick though. Post pics of the hud in action!
Dashboard time!
I would have nearly finished the dash but removing the old vinyl off the dash was 3x more painful than the door panels
Ill finish sewing the dash and get it glued down tomorrow
devin u are sooo good
Set back with more bodywork than i was hoping. HUD cover needed some small gaps filled to seat firmly on the S14 dash
I need to start stocking up on mothers vinyl and plastic dressing!
Now the best part!
This is really amazing work mate
Gauge pod that bolts to the underside of the airbag door.
Finally testing it in the car…still a few more tweaks like carpeting the areas visible around the airbag door when its open
This car needs a transformer like name…ideas?
hmmm names lol
TurboBolt , MetalShadow, SteelFrost, BlackFrost, LunorBlack
LOL
Looks hella good Devo.
---------- Post added at 08:47 AM ---------- Previous post was at 08:29 AM ----------
oh and this is yuri’s car
Engine Specifications:
SR20DET
Engine Misc.:
Nismo motor and transmission mounts
Turbocharger & Induction:
K&N filter
Fuel & Tuning:
stock
Exhaust:
Trust downpipe, S15 metal gaskets, S14 cat, Apex'i GTspec
Drivetrain:
Exedy clutch, 5-speed swap, VLSD
Weight reduction & transfer:
FRP and cf body panels
Suspension, wheels & tires:
Tein type-HE winding master coilovers
Brembo Rotors, Maxima Calipers
MHT Chicanes 18x9+0 18x10+0, prototypes
Falken FK452
Interior:
Full LE fastback gray leather interior
S14 Leather seats
power moonroof
factory HUD
Chargespeed bucket
Wisteria seat rails
Momo Rally steering wheel
180SX factory leather shiftknob and boot
Exterior:
Bmagic Full widebody aero with S13.4 front end conversion.
Klight green HID's
Origin clear signals and smoked taillights
Custom alteration of factory two-tone paint
Fiero wing
Nice work. Love the dashboard!
One door panel done and aligned! Biggest challenge yet was aligning the door panel with the dash in such a way that the door can close with ease.
Right now im tearing up the old sound deadening and going to clean up the floors for some fresh paint and dyno-mat which is going everywhere in this car from floors to in the rear all around the wheel wells and on the door panels. This is luxury and deadening adds value to the car!
If anyone has any S13 digi climate control parts please reference to this link
http://www.son240sx.org/showthread.php?215416-WTB-S13-digital-climate-control-parts
Or S14 interior parts reference to this link, thanks in advance!
http://www.son240sx.org/showthread.php?215426-WTB-S14-interior-pieces&p=3172920#post3172920
Just sayin props for skills.
Wow it almost doesn’t even look effeminate anymore, though the grey goose doesnt help lol. Anyways, awesome job dude. Are you going to keep the bimmer centre caps in or switch em out?
These for the hubcaps…which I should order now thanks for reminding me. The grey goose bottles and box is sitting outside I never went threw with finishing it. I really didnt like the sound of a fiberglass box vs MDF.
Dynamat and DONE! just waiting to source the door handle trim.
Center console needed the wiring to be cleaned up and routed better. I think ASC is to blame for 1/2 ass wiring on the verts.
Getting a sense of relief its almost all ready for spring!
I made the radio trim/shifter with a piece of 18 gauge steel with 3/4" of foam padding before wrapping it in leather.
wrapped the center piece in leather and added a few switches ill be needing to operate behind the shifter. Im still looking for an “Silvia” emblem to finish the area between the head unit and the shifter.
reshaped the S14 cluster trim to fit with my modified S13 cluster, all that is left is to wrap it in leather.
Beast.
Sick center console… can you get closer up photos though? kinda hard to tell exactly what it looks like from here
Did you just roll the steel or hammer/bend cause that looks pretty damn smooth. Nice work but there needs to be a red accent on that console piece… the red silvia emblem would be the shit!
The metal was easy enough to bend with your leg and i will be going back to re-doing it with a DIN storage box and some stitch work. Real carbon fiber or wood are options too but i don’t feel like spending the money atm
lots of effort going into wiring! love it! not going to love doing the engine harness…
Rear panels kept real simple, just need to add the piping around the insert.
wow devin i am amaze at the amount of work you put into this vert.
Keep up the good work dude.
Did you redo your convertible top? Never really notice if you did it or not.