Transmition problems!!!

SON240sx Automotive
1

hey all,

As some may know, im rebuilding a manual 92 240sx since last year. The time has come to put it all back together. Its now road worthy other then it wont move.

i need some help finding out whats wrong with the transmition? i removed the old one to replace the rear seal and when i put it back in, it wont shift gears with the engine on.

Problems:

  • shifts gears with engine off
  • engine on; neutral (little to no movement), Will not shift into any gears with out slamming it in with clutch deployed,

Mods:
-bings short shifter
-New rear seal

  • changed the rear tail section housing ( couldnt remove the original drain plug)

What ive done to problem solve:
-removed transmition to see if gears were ok. everything worked.

  • Topped up gear oil with 70w90
  • blead the clutch

So please help me, want it on the road asap.

Thanks All!

2

is your clutch installed right?

3

your clutch is installed wrong

4

Your clutch fork may be off its pivot point, preventing proper disengagement of the clutch. Its a touchy little part and when its off, you can’t really tell because it doesn’t look much different.

5

transmission** lol :stuck_out_tongue:

6

thanks all for the help.

just to let you know. The clutch disk, fly wheel and pressure plate were rusted together and wouldnt move. so i removed the pressure plate and pryed off the clutch disk with a screw driver and reinstalled the parts after buffing the rust out.

Thanks all.

7

thanks all for the help.

just to let you know. The clutch disk, fly wheel and pressure plate were rusted together and wouldnt move. so i removed the pressure plate and pryed off the clutch disk with a screw driver and reinstalled the parts after buffing the rust out.

Thanks all.