I hope to god you have to buy expensive banjo bolts like I did you bastard.
I have the same brake/banjo switch. It works great. The red coated line is a nice touch :tup:
that’ll be $60 holmes
front brake switch/hose installed. and NO gennaro, i didn’t need to spend $60 on banjo bolts…
picked up some brake fluid on the way to nicks tonight. we fixed gennaro’s bikes charging issue. i’ll fill up the brake and bleed it tomorrow. i still have to connect the brake switch yet. the switch came with spade connectors, and the bikes harness is bullet connectors.
Looks great dude! Love the color and decal combo. Only thing that looks kinda tacky is the red headlight trim
Where’d you get that brake line made with that one fitting on the end to pull the line away from the rim? I like it a lot and would like to get one in just braided.
Yea, now that its on there, I’m kind of so-so on it. But as close to done as it it, it’s staying red haha
Tell me where you got that line!!! (and that fitting)
Seems to be coming together nicely.
---------- Post added at 10:18 AM ---------- Previous post was at 10:17 AM ----------
Thanks dude! Time to get this thing registered and insured!
http://slingshot-cycles.com/products-page/cb350/1pc-stainless-steel-braided-brake-line/
This one? THe one piece that comes with the fitting!!!
Yep that’s what I got. Just pick the bike, style of bars, and color. Done deal haha
---------- Post added at 11:16 AM ---------- Previous post was at 11:15 AM ----------
Use coupon code “caferacer” for discount
Yeah I just placed an order and used ‘caferacer’ for %15 off :tup:
Had to dig out my paypal PW, lol.
edit: I went with the smoked one.
Nice dude! I had the smoked line on my cb750 a few years ago. Real nice product, little pricy, but no bs. They have the correct bends/fittings/length.
I changed up the seat cushion from the thicker foam to thinner, and it goes all the way up the back of the seat. It’s roll out camping mat. I still have yet to wrap it. I took the bike up to the gas station to fill it up with fresh gas, and get a feel for the bike. Other than riding up and down my street, now that its reg and all. The rear shocks are way too stiff. Couldn’t really soften it up much. I’ll be trying a diff set of shocks off Gennaro’s bike. I also don’t like the exhaust, I’d like to make a 2-1. Other than that, lets ride soon!
might be able to get softer springs?
I also hate my exhaust, but hell… it was free. I need to pad my seat this weekend as well. I was talking to Breetime about some exhaust fab for a 2-1 if he can free up before I leave Buff. 
I just got an offer and relocation $ to move out to Cali for work. I accepted Monday. Kinda bittersweet. I’ll be around until Aug tho, so lets ride!
i put these shocks on from Gennaro’s bike. deff softer than my shocks. i haven’t taken it for a ride yet, i need a few washers for spacers.
today I picked up a green led to put in my speedo for a neutral light.
i used the wiring off the stock neutral light. then started to disassemble the speedo once again…PITA. i needed to change a bulb in there anyway.
marked a hole. i had to put it toward the edge to avoid hitting the odo reel.
in place
back together
illuminated
maxwell, if you need any pad for your seat, i have a bunch left. well get a ride together soon. my bikes basically rideable, Gennaro’s is riding and Nick’s is very close!
You probably could have put the light at about 2 o’clock and been fine. lol
hahaha! yea i dont think the bike will go that fast anyway! i originally wanted to put it in the center right under mph.