First time tuning with DSMlink

[T34418L31]

@Lazylaser

I had my fast air idle valve sealed off and the idle screw ALL the way closed to get the car to idle right,
so yes the ic piping was totally closed off by the throttle plate from the intake manifold, in my case.

my car was idleing from the air getting past the intake manifold gasket.

idk but the car held 20lbs during a boost leak test, and after 1-2 minutes would go down to 15lbs and hold that for quite some time.

It was reccomended for me to use a magnus heat spacer gasket
http://www.slowboyracing.com/estore/product.php?productid=5257&cat=161&bestseller=Y

The throttle plate does not seal 100%, and there should be a few minor bypass holes, also. You can close the BISS the entire way and the car will still idle. It will be low, but it’ll still idle.