Hey guys,
got a bit of an issue here.
My car is at the mechanic, a friend of a friend, and he’s started working on my car, he installed the hicas stopper, etc… and was bout to instal lthe non hicas ps pump (a 95), when suddenly a prob came up.
The old 91 pump (hicas) has 4 grooves on the pulley.
The new used 95 pump i got, has 3 grooves.
The pulley on the old 91 pump is welded in and doesnt get off :? so now… what to do?
just use the hicas PS pump
you can take a part the back and and remove a few parts which will then elimate the rear from supplying the hicas (then you just plug the line coming from the pump that would goto the hicas)
there is a whole write up on ww.240sxforums.com and how to do it
#1 remove the rear Cover
#2 remove all the little square tabs
#3 put the cover back on
#4 plug up the rear hole so that it wont leak and your done
yeah but the problem is my pump is busted, hence the need for the new one 
Nice visual info though :thumbup: it should be stickied as people asked about this before (how to convert the hicas pump to this).
But yeah… mine is busted… so…