Project 10Sec $4K 4thGen

[jdaniels]

@SSmokinn SS

I would put A ls6 cam in it, 243 heads on it with the sodium filled valves and let the bottom end take the abuse. There are guys running 20+ psi on that setup on a stock bottom end running well into the 9’s. The key is low timing with a dialed in toooooon.

Aluminum 317’s would be better for the 4" bore, plus they are like $150ish on ebay. Sodium valves are useless on this build, it will never see high enough RPM to benefit from a lightweight valvetrain.