HEY THERE … I got a sr20det in a s14, what i got is a rebuild with eagle pistons and rods,new stock valves and A R P bolts to tighten a strong head gasket, lighten crank and balanced,front mount intercooler,oil cooler,big rad with fans ,3 inch front to back exhaust with a electronics cutout . OK TO WHAT I WANT TO NO I need a TURBO thats going to give me around 400hp thats good in the streets and thats good on track , If I need to get injectors tell me AND what size will work best for me , If i need anything else you can think of TELL ME …BUT let me no what TURBO IS BEST…THANKS…
gt30something rather
700cc injectors
gt2871r .64 ar 550 to 650 injetors?
When you guys say gt30 or gt2871r .64 why and i would like you guys to compare to each other and say gt2871r will spool up faster then gt30 I dont no i need more info…
thanks
holset hx35(w) much more reasonable price, spools just as fast as a gt30
---------- Post added at 09:33 PM ---------- Previous post was at 09:32 PM ----------
700cc injectors
.64 spools fast and will make 330whp with ease…
don’t bother with 400whp in a 240 if it’s your first time doing it… 300whp is PLENTY for a street / track 240.
invest is some suspension and brakes to keep up with your turbo 
and tires
300hp is so 2010 bing…
What do you guys think about this turbo
HKS GT3037 - 420/440/470 PS Output
COMPRESSOR:
-Wheel- 48/52/56 Trims - 52.8/55.0/57.0 Inducers / 76.2 Major
-Housing- 70 Inlet / 50 Outlet - 0.60 A/R
TURBINE:
-Wheel- 84 Trim - 60.0 Major / 55.0 Exducer
-Housing- GT25 inlet / External GT30 outlet; 0.61, 0.73, 0.87, 1.01, 1.12 A/R
what outlet is good 0.61, 0.73, 0.87, 1.01, 1.12 A/R
what wheel is good l84 Trim - 60.0 Major / 55.0 Exducer
and what ever theres lift
Dual Ball Bearing GT3076R Turbo assembly. T04E style compressor housing with 4.00 and 2.00" outlet. T3 turbine inlet housing with 4 bolt discharge. This turbo has a flow capacity of 500+HP.
Turbine
-Wheel: 60mm w/ 84 trim
-Available housing: .82A/R (others available, please message us)
Compressor
-Ported compressor housing standard
-Wheel: 76.2mm w/ 56 trim
-Housing: .60 ar
is your motor built for this stuff? do you have the electronics for this?
yes and if i need anything else you tell me
sounds like you gotta research a little bit
LOL!
what ecu do you have? boost controller? fuel pump? wide band? gauges?
I got a sr20det in a s14, what i got is a rebuild with eagle pistons and rods,new stock valves and A R P bolts to tighten a strong head gasket, lighten crank and balanced,fidanza flywheel,3 stage clutch,z32mass air,Walbro 255LPH fuel pump,550 injectors,front mount intercooler,oil cooler,big rad with fans ,3 inch front to back exhaust with a electronics cutout,w band and getting the ecu chipped when i go in for tuning…is it good or not our do you recommed somthing else…thanks