I’m thinkin of putting 9.5 on the back with an offset of 38. Will that fit? Will I have to cut the fender guards or anything. will it be sticking out or what.
If anyone could help, I would be gald.
Ya it will fit but that doesn’t make it a good idea!
There is too many facts missing for anyone to comment…
Yes it will work fine, but it depends on a few things:
- Lowered? How much?
- Tire choice? Width/Dia/Aspect Ratio?
- Coils or struts?
With these few questions answered you can get a much clearer opinion.
9.5’s will work just fine with a low pro tire and a good little fender pull.
i see sizes as big as 10.5.
if you’re stupid low that might rub a bit on the inside
i had 10’s on my skyline and it was rubbing. I had to pull the fender a tad. Nothing serious tho.
im thinking it would be very close to the coils with an offset of 38.
i have 9.5 +30 all around on my kouki with no fender rolls or problems at all
Pictures Please
mb’s are 9.5 +15 and they fit stock body s14 no prob, im pretty slammed too, i got a bit of rub at max turn tho
^ x2
I run a 17x9 +35 needs a slight roll with 255/40-17.
I’m running an 18x10 265/35-18 in the rear. Needed a big pull.
18x10 +36.