bought plafs 00 Z28

shitttttt i forgot to look and see if it was complete . call me tommorow night and ill see if it is

Will do shoot me a PM with ur number

interested in swapping the rear end in that z28 for the rear end in my SS? has richmond 4.10’s in it

drew drew drew…y would u swap a stong 10b for a obviously weaker high mile beat 10b (no offense to the car toomanycamio’s)

Well he got the car tuned 4 times so might as well do the rear end 3 more…

He doesn’t want 4.10’s anymore, it’s pretty simple.

lmao o n my bad the rear in pauls old camaro/toomany’s camaro has mayb 40k on it seeing as its out of ryan myers 00 6spd SS that had 33k on ittttt my badddddddddddddd

Fucking car is a joke now. What a waste

Well the rear is in need of a rebuild so I’m definetly not going to be a dick and swap it off to somebody. It’s starting to get some bearing noise above 45 mph. I’m just going to rebuild it begining of next season and probably put some 3.23s in it.

Well seeing as I bought a car with a blown up trans from you since you pounded it non stop and it wouldn’t shit into 4th at full throttle I don’t really see how rebuilding the transmission and getting rid of a broken converter is a waste. You modified it to your liking now it’s my car and I will modify it the way I want. To each their own no reason to get negative, if it upsets you that much you shouldn’t have sold the car.

I took the car out after work for a bit last night and it’s still very snappy. I laid into it at about 30 and it stepped sideways when it grabbed 2nd. Still moves out quite nicely. Now I just need to rebuild the axle, replace headers, plugs & wires and headlights.

i may know where you can get some qtp headers let me know

let me know when the headers and so on come off will . that guy still wants em for that ss he has

I’m interested as long as they fit better then the craptastic ones on there now.

Will do just so you know these things fit like crap. They hit the subframe and the drivers side collector points up at the floor. Personally the only thing I think they are good for is scrap.

all headers on f-bodys nearly hit the K member on the drive side. Before my cam, mine was about a 1/4" away from touching it…now with my cam, the motor rocks and it hits and I feel it in my feet on the floor.

ya need poly mtr mnts now lolol i haVE TO DO EM AS WELL

I checked them with a prybar the last time I had it on a lift and there wasn’t much deflection in them. If your friend still wants them when I pull them off I’ll gladly sell them to him/her just want to be clear about what I think about the quality of them.

im going to do the Spohn solid mounts, not the poly stock replacement ones.

u will hate the solids dude , if ya have noises now just wait till those are in em

9 out of 10 people that have the solids say they are fine.